Thermowell Assemblies with Integrated Compression Fitting (to suit 3.0mm dia. tubes) (Thermosense Direct)

Products

Fabricated Thermowells with Integrated Compression Fitting

Products | Fittings & Thermowells | Thermowells | Fabricated Thermowells with Integrated Compression Fitting

Thermowell Assemblies with Integrated Compression Fitting (to suit 3.0mm dia. tubes)

Enlarge Image

Thermowell Assemblies with Integrated Compression Fitting (to suit 3.0mm dia. tubes)

Product Code: WTC3

Quantity:

Note: Minimum sensor length = stem length (U) + 50mm.
E.g. 50mm length thermowell is for a 100mm sensor.

Process Thread

Stem Length

Product/Pricing Options:

Process Thread	Stem Length	Price inc. VAT exc. VAT			Product Code
Process Thread	Stem Length	(1-5)	(6-10)	(11+)	Product Code
1/2 inch BSPT (male)	50mm	£18.12 £15.10	£17.16 £14.30	£16.32 £13.60	WTC3E-6.0-4.0-050
1/2 inch BSPT (male)	100mm	£21.72 £18.10	£20.64 £17.20	£19.56 £16.30	WTC3E-6.0-4.0-100
1/2 inch BSPT (male)	150mm	£24.72 £20.60	£23.52 £19.60	£21.84 £18.20	WTC3E-6.0-4.0-150
1/4 inch BSPT (male)	50mm	£17.28 £14.40	£16.56 £13.80	£15.60 £13.00	WTC3C-6.0-4.0-050
1/4 inch BSPT (male)	100mm	£21.00 £17.50	£19.92 £16.60	£18.84 £15.70	WTC3C-6.0-4.0-100
1/4 inch BSPT (male)	150mm	£24.00 £20.00	£22.92 £19.10	£21.60 £18.00	WTC3C-6.0-4.0-150

The WTC3 threaded thermowells have an integrated compression fitting that includes a single compression olive to suit 3.0mm diameter tubes. They are fabricated from 316 Stainless Steel material and are supplied with a male process thread (complete with hexagon) which screws into the process.The stem has an outside diameter of 6mm (± 0.2mm) and a 4mm inside diameter. Available with 1/2 inch BSPT and 1/4 inch BSPT male process thread options.The pockets are stocked in standard lengths up to 150mm so can normally be supplied ex-stock if required urgently.Note: Minimum sensor length = stem length (U) + 50mm. E.g. 50mm length thermowell is for a 100mm sensor.

• 316 stainless steel standard material
• 6.0mm stem diameter (± 0.2mm) (4.0mm diameter ID)
• 1/2 inch BSPT and 1/4 BSPT male process thread options
• Integral compression fitting suits 3.0mm dia. tube
• Available ex-stock
• Replacement olives and nuts available

1/2 inch BSP Tapered Male Process Thread
Standard Material	316 Stainless Steel
Stem Diameter	6.0mm (± 0.2mm) (4.0mm ID)
Integral Compression Fitting	To suit 3.0mm diameter tube
Thread Length	19mm
Body (A/F)	22mm
Nut (A/F)	14mm
Standard Lengths (U)	50mm, 100mm, 150mm

1/4 inch BSP Tapered Male Process Thread
Standard Material	316 Stainless Steel
Stem Diameter	6.0mm (± 0.2mm) (4.0mm ID)
Integral Compression Fitting	To suit 3.0mm diameter tube
Thread Length	14mm
Body (A/F)	14mm
Nut (A/F)	11mm
Standard Lengths (U)	50mm, 100mm, 150mm