A fast responsive, high temperature PTFE insulated thermocouple, commonly used in aerospace, composite, laboratory, autoclave and steriliser applications where under pressure the cable must be gas, steam or water-tight. The cable has a round construction.
One pair of solid 1/0.376mm diameter conductors. The wire is laid flat then PTFE extruded in a Single-Shot construction (round). The Single-Shot construction provides a gas, steam and water-tight insulation.
• Temperature rated -75°C to +250°C
• Round construction
• Available in Thermocouple Extension Grades KX, JX, TX, NX
• Available in 1, 2 and 5 metre lengths
• Can be supplied with bare tails, a fitted miniature plug or a fitted standard plug
• Colour coded to IEC 60584.3 (BS EN 60584.3)
• Flexible construction, PTFE insulation is resistant to most known chemicals, fluids and oils
| Product Options |
|---|
| Sensor Type | Welded Tip Fast Response Thermocouple Sensor (PTFE Single-Shot) |
| Conductor/Thermocouple Type | Type K, J, T, N |
| Cable Insulation | PTFE Single-Shot (+250°C) |
| Conductor Diameter | 0.376mm |
| Cable Termination Options | Bare Tails, Miniature Thermocouple Plug, Standard Thermocouple Plug |
| Cable Length | 1 Metre, 2 Metre, 5 Metre |
