The PHS Pt100 Hermetically sealed sensors offer a simple, easy to use solution for applications where the sensing junction needs to be protected from electrical interference or protected from moisture/liquids.
As standard the sensors are tested for electrical insulation at 1.0Kv. On request the sensors can be tested at higher voltages.
The PFA is temperature rated -100...+260ºC making it suitable for a wide range of applications. The insulation is easily cleaned and suitable for sterilisation.
The sensors are supplied with a 3-wire configuration, grade B element, and can be supplied with standard tails or a miniature 3-pin RTD plug.
2 and 4-wire configurations are also available - contact sales for further information.
Available in lengths: 1m, 2m and 3m.
Pt100, 3-wire configuration, grade B element
1m, 2m, 3m cable lengths available
Hermetically Sealed Tip - simple & easy to use
Suitable for insertion into liquids, including oil
PFA Insulation, Oil & Chemical Resistant
Suitable for use in temperatures ranging from -100...+260ºC
Electrically Insulated tip, 1.0Kv (can be tested at higher voltages)
Flexible 7/0.2mm diameter 24 AWG conductor
Available with standard tails or miniature 3-pin RTD plug termination
Product Options |
---|
Sensor Type | RTD (Pt100) Hermetically Sealed Sensor |
Wiring Configuration | 3-wire |
Grade of Element | B (Accuracy: ±0.30°C at 0°C, ±0.80°C at 100°C) |
Cable Length (mm) | 1 metre, 2 metre, 3 metre |
Optional Cable Termination (supplied as standard with tails) | Miniature 3-pin RTD Plug supplied attached |
People who bought this product also bought: