The single channel WiFi sensor measures the temperature of the environment in which the probe(s) are situated and is typically accurate to ±1.5°C / ±3°F.
The sensor is supplied with 1 x type K thermocouple probe. Perfect for a wide range of temperature monitoring situations e.g. manufacturing processes, cold/hot storage and laboratory conditions. The probe is removable so alternatives can also be used to meet specific requirements providing they operate within the same temperature range. The units support K, J and T type thermocouple probes which are connected using miniature thermocouple connectors.
Data is streamed wirelessly over any WiFi network and can be viewed on a PC using the free EasyLog WiFi software (available for download using the link below) or on the EasyLog Cloud.
During configuration the sensor will search for an existing wireless network whilst physically connected to the PC. It can then be placed anywhere within range of the network. If the sensor temporarily loses connectivity with the network, it will log readings until it is able to communicate again with the PC application or EasyLog Cloud (max 30 days at 10 second sample interval). The range of the sensor can be increased by using WiFi extenders.
The battery can be recharged via a PC using the USB cable provided or via a USB +5V wall adapter (not included).
The EasyLog WiFi software will allow set-up, data logging and data review. Set-up features will include sensor name, °C/°F, sample rate, and high/low alarms. Once configured, historic data can be viewed via the graphing tool or exported into Excel.
The sensor is IEEE 802.11bgn (2.4GHz) compliant (MAC Address starting 98:8B:AD:2 only), supports WEP, WPA/WPA2 encryption and enterprise networks (PEAP, TTLS, FAST) and has a protection rating of IP40.
The unit is freestanding, but can be attached to a wall or surface using the bracket provided. It can be clipped in and out as required.
Lascar Product Code:
EL-WiFi-TCFeatures• Temperature data logging sensor with external Thermocouple Probe
• Single channel for 1 x external probe
• -270°C to +1372°C (-454°F to +2501°F) temperature measurement range (probe dependent)
• Accepts Thermocouple Type K, J, T probes
• Wirelessly stream and view data via WiFi on PC or EasyLog Cloud
• Easy setup using free EasyLog WiFi PC software
• View and analyse multiple sensors, including graphing of historic data
• Configurable high and low alarms with indicator
• Sensor memory stores all data even if WiFi is temporarily disconnected
• IP40 protection rating
• IEEE 802.11bgn (2.4GHz) compliant (MAC Address starting 98:8B:AD:2 only)
• Supports WEP, WPA/WPA2 encryption and enterprise networks
• Rechargeable internal lithium polymer battery
• Supplied with wall bracket and USB cable (Type A to Micro B)
• Supplied with 1 x Thermocouple Type K probe
| Technical Details |
|---|
| Battery Life † | > 6 months typical under ideal conditions |
| Probe Measurement Range | Type K (supplied probe): 0°C to +200°C (+32°F to +392°F) |
| Type K: -270°C to +1372°C (-454°F to +2501°F) |
| Type J: -210°C to +1200°C (-346°F to +2192°F) |
| Type T: -270°C to +400°C (-454°F to +752°F) |
| USB Supply Voltage | 4.5V D.C. (min), 5.5V D.C. (max) |
| Operating Temperature Range | -20°C to +60°C (-4°F to +140°F) |
| Logging Period (user configurable) | Every 10 seconds (min), 10 minutes (typical), 12 hours (max) |
| Transmission Period (user configurable) | 1 minute (min), 1 hour (typical), 24 hours (max) |
| Temperature Measurement Range | -270°C to +1372°C (-454°F to +2501°F) |
| Temperature Measurement Resolution | 0.1°C (0.2°F) |
| Temperature Display Resolution | 0.1 |
| Temperature Accuracy | ±1.5°C (±3°F) |
| Unit of Measurement | °C, °F |
| Dimensions (excluding bracket) | 82mm (H) x 70mm (W) x 23mm (D) |
| Supplied Probe(s) | 1 x Type K Thermocouple Stainless Steel Probe (class 2), 1.5m |
† Battery life is dependent on a variety of factors such as transmission period, WiFi encryption method, sampling rate, operating temperature etc.
 | | Free EasyLog WiFi software |
| | Easy to install and use, the EasyLog WiFi software allows connection of sensors to a WiFi network. The user can select where data is stored during the setup process (computer or cloud). EasyLog Cloud accounts can be created during setup. Compatible with Windows 10 and 11
|
 | | EasyLog Cloud App (Android) |
| | The EasyLog Cloud app extends the ability to remotely access your data from WiFi sensors to Android users. All the convenience of the EasyLog Cloud, now in your pocket with new features just for the App.
|
 | | EasyLog Cloud App (iOS) |
| | The EasyLog Cloud app on the App Store allows you to remotely access data from your WiFi sensors on your Apple iPhone and iPad.
|
Note: supplied product colour may vary from image shown
