Easily monitor the temperature of your cold chain process and store up to 8192 readings with this single-use USB data logger. No additional software or USB drivers are required to program the data logger as they are all contained within the unit.
Simply plug the logger into a USB port of your computer, run the software to set parameters such as sampling interval, start delay and alarms, press the start key and place the logger into its IP65 pouch and then into the area to be monitored. Once completed, press the stop key, plug the logger back into your computer and a PDF report of results will be generated automatically.
An instruction manual and manufacturer's calibration certificate are also embedded in PDF format on each data logger.
Compatible with Microsoft Windows XP, 7, 8 and 10.
Easy to use Low cost single-use data logger with accurate thermistor sensor
Large memory capacity: 8192 readings
Plug and play (no software required)
USB 2.0 connection interface
Tamper proof
Automatic PDF report generation at end of process (pdf viewer required)
Fully programmable: language, sampling interval, start delay, alarm delay, unit, alarm range, alarm type, username and password
Password file encryption technology to secure data integrity
Compact, light, IP65 waterproof and flat design
4 status LEDs: REC, Low Bat., High and Low temperature alarms
"Mark" key to allow 8 markings during data gathering
Summary, graph and detailed data list PDF report with serial number
Embedded instruction manual and manufacturer's calibration certificate
Software/manual languages: English, German, French, Italian, Spanish
Compatible with Microsoft Windows XP, 7, 8 and 10
EN12830, FDA 21 CFR part 11 and RoHS compliance Technical Details |
---|
Temperature Range | NTC thermistor, -30°C to +70°C (-22°F to +158°F) |
Temperature Resolution | 0.1°C (0.1°F) |
Temperature Accuracy | ±0.5°C |
Unit of Measurement | °C, °F |
Logging Type | Single-use |
Sampling Points | 8192 readings |
Shelf Life | 12 months |
Operating Temperature | -30°C to +70°C (whilst logging), room temperature whilst in computer |
Operating RH% | Humidity < 80% |
Storage Temperature | -20°C to +50°C (-4°F to +122°F) |
Storage RH% | Humidity < 90% |
Battery | Internal 3.0V CR2032 (non-replaceable) |
Battery Life | ~12 months (depending on sampling rate) |
Sampling Interval | 30 seconds, 5, 10, 30, 60, 90, 120 minutes |
Start Delay | 0, 5, 30, 45, 60, 90, 120 minutes |
Selectable Alarm Range | -20°C to -10°C, -10°C to 0°C, +2°C to +8°C, 0°C to +15°C, 0°C to +25°C, +15 to +25°C or Manual Alarm Range |
Alarm Delay | 0, 5, 30, 45, 60, 90, 120 minutes |
Alarm Type | Single event, cumulative, disable |
Operation Keys | 2 keys: Start/Stop and Mark |
LED Indicators | REC, Low Bat., High Alarm, Low Alarm |
Connection Interface | USB 2.0 |
Certifications | EN12830, FDA 21 CFR part 11, RoHS compliance |
Dimensions (unpouched) | 73mm (L) x 33mm (W) x 2.5mm (D) |
Dimensions (pouched) | 105mm (L) x 51mm (W) x 2.5mm (D) |
Weight | ~13g |
| Embedded Software Compatibility |
Compatible with Microsoft Windows XP, 7, 8 and 10 |
People who bought this product also bought: