Thermosense Direct
Telephone: 01628 52301501628 523015
 
Shopping BasketShopping Basket

(exc. shipping and VAT)
 

Pressure Transmitters/Transducers

Pressure Transmitter (0~5V, G1/4)

Product Code: APB5

Quantity:

Pressure Range  

Product/Pricing Options:

Pressure RangePrice inc. VAT
exc. VAT
Product
Code
(1-5)(6-10)(11+)
0 to 1.0 bar£99.60
£83.00
£94.80
£79.00
£90.00
£75.00
APB5-0010
0 to 1.6 bar£99.60
£83.00
£94.80
£79.00
£90.00
£75.00
APB5-0016
0 to 2.5 bar£99.60
£83.00
£94.80
£79.00
£90.00
£75.00
APB5-0025
0 to 4.0 bar£99.60
£83.00
£94.80
£79.00
£90.00
£75.00
APB5-0040
0 to 6.0 bar£99.60
£83.00
£94.80
£79.00
£90.00
£75.00
APB5-0060
0 to 10.0 bar£99.60
£83.00
£94.80
£79.00
£90.00
£75.00
APB5-0100
0 to 16.0 bar£99.60
£83.00
£94.80
£79.00
£90.00
£75.00
APB5-0160
0 to 25.0 bar£99.60
£83.00
£94.80
£79.00
£90.00
£75.00
APB5-0250
0 to 40.0 bar£99.60
£83.00
£94.80
£79.00
£90.00
£75.00
APB5-0400
0 to 60.0 bar£99.60
£83.00
£94.80
£79.00
£90.00
£75.00
APB5-0600
0 to 100.0 bar£99.60
£83.00
£94.80
£79.00
£90.00
£75.00
APB5-1000

Optional Extra:

Inhouse Testing of Pressure Transmitter: 25%, 50%, 75% points, rising & falling (+£30.00)

Note: for in-house testing/calibration your invoice address will be used for certification
The APB5 range of 0-5V DC high accuracy, low cost ceramic pressure transmitters are designed for use in most industrial applications and are suitable for the measurement of most pressure mediums.

The transmitters incorporate a high quality thick-film ceramic sensor and special amplified circuit. Output is configured to 0-5V DC (0-10V DC and 4~20mA also available). The pressure diaphragm is made from ceramic material and its wetted parts are made from 316L stainless steel.

Because of the thermal stability of ceramic and its thick-film resistance, the transmitter can be operated at a higher temperature range; at the same time, this also makes the zero and sensitivity thermal shifts over the whole operating temperature range of the transmitter very small.

• 0-5V DC output signal
• G1/4 - 1/4" BSP(M) process connection
• Vast pressure measurement range
• Wide application scope and long service life
• Automatic testing and laser trimming compensating zero and sensitivity
• High accuracy and long-term stability
• Good anti-corrosion and anti-impact ability
• IP65 rated

Technical Details
Pressure MediumGas or liquid compatible with ceramic and stainless steel
Pressure Range0...100 bar
Overload Pressure150%FS
Burst Pressure200%FS
Output Signal0-5V DC (3-wire)
Accuracy0.25%FS
Load ResistanceNo limit
Long-Term Stability<0.2%FS/year
Supply Voltage12~30VDC
Compensated Temperature Range0~70°C
Operating Temperature Range-20°C to +80°C
Storage Temperature Range-30°C to +90°C
Temperature Coefficient Of Zero 0.3%FS/10°C
Temperature Coefficient Of Span 0.3%FS/10°C
Insulation Resistance 100MΩ@50VDC
Process ConnectionG1/4 - 1/4" BSP(M)
Electrical ConnectionHirschmann style connector (others available)
Material of Wetted Part 1Cr18Ni9Ti
Material of Pressure MembraneCeramic (Piezoresistive pressure sensor > 200 bar)
Material of Housing1Cr18Ni9Ti
SealingN-Butyronitrile or Fluoro-Rubber Sealing Ring
Ingress Protection RatingIP65 rated
Speed of Response1ms


 Global Payments How PayPal WorksSecurityMetrics Credit Card Safe 

We are ISO 9001 certified. Click to view our certificate.  Find us on Facebook  Follow us on Twitter  Visit our YouTube Channel  Waste Electrical and Electronic Equipment (WEEE Directive)